Hewco 1260 Wetsurf Lumber Marking Ink

For automatic grading or hand-stamping on wet, green or dry lumber. Water-proof, sun-proof, quick-drying, ideal for sub-zero conditions (Available in one gallon containers) black colour and thinner.

Hewco Roto Flow Ink

Compatible with all grade printing equipment using neoprene feed rolls. High viscosity means longer life than traditional grading inks. Low fade due to UV exposure. Completely water resistant. Used extensively in lumber and sheathing plants. APA Certified Grading Ink (blue and black). Stock colours (Available in one, five, 45 gallon and tote containers) black, blue, red and green.

Hewco 1261 Roller Stencil Ink

For stencilling use on dry wood with foam stencil rollers. Water-proof. Stock colours (Available in one gallon container) red and blue.

Hewco F200 MSR Ink

To identify MSR lumber, compatible with all spray systems, can also be used as a Moisture Meter Ink in plywood applications. Supplied in concentrate, also available in a powder concentrate. Low PH, negligible corrosive, non-disappearing. Stock colours (Available in one and five gallon containers) black, green, red, blue, violet, orange and yellow.

Hewco Houdini (Disappearing) Moisture Meter Ink

To identify moisture content in lumber and plywood, compatible with all spray systems. Stock colours (Available in five gallon containers) red and blue.

Hewco 1270 Pulp Bale Marking Ink

For the stencilling of markings on bales of pulp. FD&C approved, 100% re-pulpable. Stock colours (Available in one gallon containers) black, red, blue and green.

Hewco 80-20 Block-Out Pulp Bale Marking Ink

For blocking-out or covering previously stencilled marks on bales of pulp. FD&C approved, 100% re-pulpable. Stock colours (Available in one and five gallon containers) blue and red.

 

Marsh Rolmark Ink

Waterproof, permanent and fast-drying; marks on any porous or non-porous surface. Rolmark Stencil ink can be used with: Rolmark RFR200 Fountain Roller, FB-26 Fountain Brush, and Roller System, or standard spray gun. Stock colours (Available in one quart and one gallon containers) black, blue, green, orange, red, white, yellow, bright blue and brown.

 

 		 

 

 

Pre-Charged Ink Rolls and Ink Pads

Pre-charged Porelon Brand Ink Rolls and Ink Pads. Durable and long lasting. Most sizes In stock with custom sizes available. 5 standard colours, (black, red, blue, green, purple). Special colours also available. Call for quantity discounts. Will Fit Burelbach, Claussen, Irvington, Timberstar and other makes. When Ordering Please State The Following: a) Face width b) Inside diameter c) Outside diameter d) Colour e) Quantity. (discounts at 25, 50 and 75 units)

 

 

 

 

Dry Ink Rolls

Type DR100 Latex (Fits Timberstar) 4 1/4" outside diameter x 2 1/8" inside diameter x 1" face.

Type HE103-6-N Neoprene 2 1/2" outside diameter x 1" inside diameter x 3" face. Custom sizes also available.

Type HE100-2 High Performance ink rolls for Timberstar grade printers.

 

 		 

 

 

Rudd Tree & Log Marking Paints


Hydra Bond. A highly specialized marking paint for the forest industry. Just as the name indicates, Hydra Bond was developed specifically for use during adverse weather conditions or when marking wet wood. Hydra Bond's exclusive formula gives unequalled performance under severe, uncompromising weather and handling situations. It even penetrates through thin layers of ice, snow and slime.

Hi-Vis Fluorescent Marking. The ultimate in super high visibility marking! Hi-Vis Fluorescent Marking aerosols give the results you need. Six vibrant fluorescent colors designed for short term marking of trees, logs or lumber. With Hi-Vis you will create a strong visual impact and attract attention at greater distances.